Look at the bottom of the page.
Hope it helps
Friday, June 3, 2011
Should we keep, change, or remove the senate?
What do you think? Should we keep , change, or remove the senate we have in the government? What are some reasons for your answers??Should we keep, change, or remove the senate?Change.
Keeping it would mean that we have a bunch or inept and corrupt politicians %26quot;representing%26quot; us and ruining our country. Removing the senate would mean that we are opening the way for the whole legislative branch to be removed, thus allowing us to eb stripped of our freedoms.
The system is not the problem, the people who run it are.Should we keep, change, or remove the senate?Actually I believe all of them should be limited to just 2 terms so they don't get fat and complacent.Perhaps then they would realize they work for us and not the other way around as they spend money like a drunk person with a new credit card and no limit to max out.Should we keep, change, or remove the senate?We should impeach every Republican who's proven themselves dedicated to preventing our recovery.
They WANT us to collapse, so they can blame it on the Democrats, and regain power.Should we keep, change, or remove the senate?Just get rid of all democrats...
We have to term limit the senators. 2 terms max. We also need to term limit the house - seven terms maximum there.
Need to let these crooks move on and do something else with their lives. They certainly aren't helping our country with anything.Should we keep, change, or remove the senate?We cannot remove neither the representatives neither the senate, because .
For the simple reason that we irresponsibly elect them and continue supporting them.
Why we are in bankcruptcy because families spend to much ,governments, state, federal (Senate) they approve to much expenses with money that doesn't have only, they only Sign the credits papers so that our generations pay it.
The answer is that the justice should be applied equally all without exception, so much to representatives, senators, presidents, bankers etc.Should we keep, change, or remove the senate?It would take an amendment to the constitution to remove the Senate. It's highly doubtful that the Senate would let something like that happen. Remember, the job of a bureaucracy's is to justify it's existence.name my dog from common suggestions
Keeping it would mean that we have a bunch or inept and corrupt politicians %26quot;representing%26quot; us and ruining our country. Removing the senate would mean that we are opening the way for the whole legislative branch to be removed, thus allowing us to eb stripped of our freedoms.
The system is not the problem, the people who run it are.Should we keep, change, or remove the senate?Actually I believe all of them should be limited to just 2 terms so they don't get fat and complacent.Perhaps then they would realize they work for us and not the other way around as they spend money like a drunk person with a new credit card and no limit to max out.Should we keep, change, or remove the senate?We should impeach every Republican who's proven themselves dedicated to preventing our recovery.
They WANT us to collapse, so they can blame it on the Democrats, and regain power.Should we keep, change, or remove the senate?Just get rid of all democrats...
We have to term limit the senators. 2 terms max. We also need to term limit the house - seven terms maximum there.
Need to let these crooks move on and do something else with their lives. They certainly aren't helping our country with anything.Should we keep, change, or remove the senate?We cannot remove neither the representatives neither the senate, because .
For the simple reason that we irresponsibly elect them and continue supporting them.
Why we are in bankcruptcy because families spend to much ,governments, state, federal (Senate) they approve to much expenses with money that doesn't have only, they only Sign the credits papers so that our generations pay it.
The answer is that the justice should be applied equally all without exception, so much to representatives, senators, presidents, bankers etc.Should we keep, change, or remove the senate?It would take an amendment to the constitution to remove the Senate. It's highly doubtful that the Senate would let something like that happen. Remember, the job of a bureaucracy's is to justify it's existence.
How do I uninstall a trial version of Microsoft Office Standard 2007 no change/remove option in my control pan
I don't have the little change/remove button by the program in my add/remove section in my control panel...so how do I get rid of it...it's an expired trial version....How do I uninstall a trial version of Microsoft Office Standard 2007 no change/remove option in my control panSee http://support.microsoft.com/?kbid=92821 %26quot;How to uninstall the 2007 Office system if you cannot uninstall it by using the 'Add or Remove Programs' feature%26quot;.
--
garfield-n-odie
Microsoft MVP 2005-2008
http://mvp.support.microsoft.com/How do I uninstall a trial version of Microsoft Office Standard 2007 no change/remove option in my control pango to the folder where you install ms office there'll be one file name %26quot;uninstall ms office%26quot; or like that double click on that
otherwise install new ms office over that old one....
--
garfield-n-odie
Microsoft MVP 2005-2008
http://mvp.support.microsoft.com/How do I uninstall a trial version of Microsoft Office Standard 2007 no change/remove option in my control pango to the folder where you install ms office there'll be one file name %26quot;uninstall ms office%26quot; or like that double click on that
otherwise install new ms office over that old one....
How do you change or remove a Civic Coupe '06 EX shift knob?
there is usually a small hex head bolt that is holding the shift knob on. if you can find that and unscrew it the shift knob will slip right off. if might be under a ring though for cosmetics so if you have any rings on it, usually chrome finished, you can see if they will spin to unscrew or if you can pop them off to get to the hex head bolt. you might just be overlooking it though because they are usually flush with the shift knob and the same color so look really close when you do try to find it.
if there isn't a bolt you might want to look for a c clip that is holding it on, once again it will be very well camouflaged with the shifter so you will have to look hard, once you find it, using a flathead screw driver, pop the clip out and the shift knob will slide right off.
good luck
if there isn't a bolt you might want to look for a c clip that is holding it on, once again it will be very well camouflaged with the shifter so you will have to look hard, once you find it, using a flathead screw driver, pop the clip out and the shift knob will slide right off.
good luck
How do I remove the door panel of a rover 416 to change the speakers?
I know how to change the speakers no problem I just can't work out how to remove the door panel.How do I remove the door panel of a rover 416 to change the speakers?what age is the car? it varies depending on what mark it is.
Dont know about the mk1 - very boxy - up to G reg i think
The mk 2 is easy, if your careful you can prise off the fabric cover without removing the door panel, slide a screwdriver under the rear edge and CAREFULLY prise it up, there are 2 tabs under there that break easily. Alternatively, there are screws around the edges and also in the bottom of the handle and behind the opening handle. lift it off, it hooks into the window aperture. Unclip the electrical connectors and set it aside, fit your new speaker and reassemble in reverse of dismantling.
I think the mk3 is similar but i can't be sure.
Hope this helps,
SamHow do I remove the door panel of a rover 416 to change the speakers?They sould just pop off if you pull them, but take care cos the little plastic poppers like to snap and you cant get them back on.How do I remove the door panel of a rover 416 to change the speakers?HAVE A LOOK ON THE EDGES OF THE PANEL YOU SHOULD FIND SCRES THERE ARE SCREWS ON THE ARM REST EASE BACK CHROME PIECES ON WINDOW WINDERS IF NOT ELECTRIC AND RELEASE CLIP ON THEBOTTOM CAREFULLY PLACE A WIDE KNIFE AND EASE THE PANEL AWAY FROM THE DOOR IT IS HELD ON WITH PUSH CLIPSHow do I remove the door panel of a rover 416 to change the speakers?if you dont have electric windows the bloody arm can be a pain. use a rag to get the clip out from behind and make shure it does not ping to the other end of the room.
Dont know about the mk1 - very boxy - up to G reg i think
The mk 2 is easy, if your careful you can prise off the fabric cover without removing the door panel, slide a screwdriver under the rear edge and CAREFULLY prise it up, there are 2 tabs under there that break easily. Alternatively, there are screws around the edges and also in the bottom of the handle and behind the opening handle. lift it off, it hooks into the window aperture. Unclip the electrical connectors and set it aside, fit your new speaker and reassemble in reverse of dismantling.
I think the mk3 is similar but i can't be sure.
Hope this helps,
SamHow do I remove the door panel of a rover 416 to change the speakers?They sould just pop off if you pull them, but take care cos the little plastic poppers like to snap and you cant get them back on.How do I remove the door panel of a rover 416 to change the speakers?HAVE A LOOK ON THE EDGES OF THE PANEL YOU SHOULD FIND SCRES THERE ARE SCREWS ON THE ARM REST EASE BACK CHROME PIECES ON WINDOW WINDERS IF NOT ELECTRIC AND RELEASE CLIP ON THEBOTTOM CAREFULLY PLACE A WIDE KNIFE AND EASE THE PANEL AWAY FROM THE DOOR IT IS HELD ON WITH PUSH CLIPSHow do I remove the door panel of a rover 416 to change the speakers?if you dont have electric windows the bloody arm can be a pain. use a rag to get the clip out from behind and make shure it does not ping to the other end of the room.
Mitsubishi 100hd lamp change how to remove the change lamp message?
I have a hd1000 and I kjust purchased a new lamp and replaced it but it still shows that it is over its hours!! How can I can the message on my projector and reset the hours?Mitsubishi 100hd lamp change how to remove the change lamp message?After connecting the power cord, reset the lamp operation time by holding down the left-arrow, right-arrow, and POWER buttons on the control panel at the same time for about three seconds.
Unless these three buttons are pressed at the same time, the lamp operation time isn't reset.
Make sure that the STATUS indicator blinks twice and the lamp operation time is reset successfully.
Unless these three buttons are pressed at the same time, the lamp operation time isn't reset.
Make sure that the STATUS indicator blinks twice and the lamp operation time is reset successfully.
Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?
I'm a 53 year-old female and I found my oil filter, but it is two feet down from the hood and there is an oil pan beneath it. I have to change the oil too. I don't know if I'm supposed to remove the oil pan or do the work from under the hood. I have a Toyota Sequoia.Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?no. there is a drain plug on the bottom of your oil pan. unscrew that to drain the oil. then you can unscrew the filter. when you put the new one on put a lil oil on the gasket of your new oil filter. make sure you tighten everything up pretty good.Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?DO NOT REMOVE THE PAN. you just have to unscrew the filter.Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?You never have to remove the oil pan just get underneath the car and using a wrench loosen the filter and then twist it off and install the new one by hand no wrench. Then loosen the drain plug on the bottom of the pan using a 14mm wrench then reinstall by hand when the oil is dripping out. Then fill the engine with oil usually holds 5 qt'sDo I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?you don't remove oil pan to change oil. there is a plug in the pan remove it catch oil in a pan from underneath the car. filter can be removed from where ever you can get to it, topside or underneath. sounds like you better get someone to guide you through the job once or twice.Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?You need to access the oil filter from underneath the vehicle, turn your wheels all the way to the left and you will be able to reach it from there.
I think you are talking about the skid plate that is protecting the filter, you do not have to remove that, reach the oil filter through the side of the plate.
There is also an opening on the skid plate so you can easily change your oil.Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?you can change the oil by just unscrewing the bolt on the bottom of the oil pan and you can take off the oil filter by buying a oil filter wrench and unscrewing it you do not have to take off the oil panDo I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?most vehicles are designed to be changed from bottom side with a catch pan underneath for oil drainage,i would think you would opt for a quik change place to do it for you. they're neat,they vacuum your car,check and adjust tire pressure,and top off fluids for about $29.95Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?no you certantly do not change oil pan you drain the oil from the bolt on the bottom of oil pan and take the filter off.Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?NO, your not suppose to remove the pan just to get the filter out, if your unsure on what you are doing. take it to the oil change shop, its gonna cost more, but your gonna be sure that it's done right..Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?You will need to be able to get under the car to have access to the drain plug (bolt) that is on the side bottom of your oil pan. Remove the plug and drain the oil into a shallow pan large enough to hold 1.5 gallon of fluid. You may want to place cardboard or newspaper on your garage floor so you do not have a bigger mess. Allow the oil to completely drain into a container. Once the oil has drained, refit the oil plug by screwing it back into the oil pan. Make sure you do not cross thread it and tighten it snugly. If any oil got onto your exhaust pipe or car frame, make sure you wipe up as much as you can to avoid errant dripping.
As for your oil filter, you will need a tool to remove the oil filter. It will screw off. Remember that there is oil in the old filter. You may want to have a rag under the filter as well as the drip pan. Dispose of the old filter.
When replacing with the new filter, place your finger in some of the new oil, just enough to wet your finger. Rub the new oil onto the rubber gasket of your new oil filter. This will aid in seating the gasket. When you screw on the new filter, be careful not to over tighten. A good measure is when the rubber gasket touches the engine, turn the filter 3/4 of a turn tighter. That's it.
Make sure that you place new oil into the engine according to your owners manual. It is important not to overfill the engine.
Upon staring the vehicle, look for the oil light to go off or if you have an oil gage, look for the oil pressure needle to climb. This should happen within 5 seconds of starting the vehicle. If not, shut off the vehicle.
Once you have it up and running with new the new oil and filter, check for leaks. You should be good to go.
Hope this helps.guy myspace what is a cd rom
I think you are talking about the skid plate that is protecting the filter, you do not have to remove that, reach the oil filter through the side of the plate.
There is also an opening on the skid plate so you can easily change your oil.Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?you can change the oil by just unscrewing the bolt on the bottom of the oil pan and you can take off the oil filter by buying a oil filter wrench and unscrewing it you do not have to take off the oil panDo I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?most vehicles are designed to be changed from bottom side with a catch pan underneath for oil drainage,i would think you would opt for a quik change place to do it for you. they're neat,they vacuum your car,check and adjust tire pressure,and top off fluids for about $29.95Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?no you certantly do not change oil pan you drain the oil from the bolt on the bottom of oil pan and take the filter off.Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?NO, your not suppose to remove the pan just to get the filter out, if your unsure on what you are doing. take it to the oil change shop, its gonna cost more, but your gonna be sure that it's done right..Do I need to remove the oil pan to change my oil and filter? Filter is two feet down from hood.?You will need to be able to get under the car to have access to the drain plug (bolt) that is on the side bottom of your oil pan. Remove the plug and drain the oil into a shallow pan large enough to hold 1.5 gallon of fluid. You may want to place cardboard or newspaper on your garage floor so you do not have a bigger mess. Allow the oil to completely drain into a container. Once the oil has drained, refit the oil plug by screwing it back into the oil pan. Make sure you do not cross thread it and tighten it snugly. If any oil got onto your exhaust pipe or car frame, make sure you wipe up as much as you can to avoid errant dripping.
As for your oil filter, you will need a tool to remove the oil filter. It will screw off. Remember that there is oil in the old filter. You may want to have a rag under the filter as well as the drip pan. Dispose of the old filter.
When replacing with the new filter, place your finger in some of the new oil, just enough to wet your finger. Rub the new oil onto the rubber gasket of your new oil filter. This will aid in seating the gasket. When you screw on the new filter, be careful not to over tighten. A good measure is when the rubber gasket touches the engine, turn the filter 3/4 of a turn tighter. That's it.
Make sure that you place new oil into the engine according to your owners manual. It is important not to overfill the engine.
Upon staring the vehicle, look for the oil light to go off or if you have an oil gage, look for the oil pressure needle to climb. This should happen within 5 seconds of starting the vehicle. If not, shut off the vehicle.
Once you have it up and running with new the new oil and filter, check for leaks. You should be good to go.
Hope this helps.
How do I remove and change a 2D lightbulb?
In our bathroom, there is a 2D fluorescent light bulb, and we can't work out how to get it out! Any help would be great :)How do I remove and change a 2D lightbulb?I do not agree with some of the answers.
When the pins are lined up, the lamp pushes into place; so in theory it will pull out when you replace it. In practice, the heat often jams it. Hold it by the plastic piece in the centre, and gently pull away from the fitting. If it does not come easily, gently agitate it by twisting lin both directions, and with a little patience, it will come off. Before you remove the lamp, just note which way round it it fitted.How do I remove and change a 2D lightbulb?Thank you Asker, you are the best. I had no clue how to unplug it till i saw your post.
It is a tricky job and worth getting someone in who knows what they are doing.How do I remove and change a 2D lightbulb?..A gentle twist should do the trick....... most are twist and lock in...........some are spring loaded on one end..... if the gentle twist doesn't work try moving back and forth.......careful..... if the bulb breaks..... the poison gas inside could blind you,,,,,,,,, if you still ant get it out...... ask a handy guy to help youHow do I remove and change a 2D lightbulb?You can find someone that can help you change it. Obviously that person will know how.How do I remove and change a 2D lightbulb?you usually just give it a good hard pull...if its a 2D fitting(usually stamped on lamp plastic bit in middle)How do I remove and change a 2D lightbulb?by giving it an onion
When the pins are lined up, the lamp pushes into place; so in theory it will pull out when you replace it. In practice, the heat often jams it. Hold it by the plastic piece in the centre, and gently pull away from the fitting. If it does not come easily, gently agitate it by twisting lin both directions, and with a little patience, it will come off. Before you remove the lamp, just note which way round it it fitted.How do I remove and change a 2D lightbulb?Thank you Asker, you are the best. I had no clue how to unplug it till i saw your post.
Report Abuse
How do I remove and change a 2D lightbulb?these are straight forward to replace the bulbs in. just remove the cover of the fitting to access the bulb, then hold the square plastic centre piece of the bulb and pull it straight downwards(assuming the light is on the ceiling) and it should come out. much like unplugging a plug from a socket really. when getting the replacement bulb, make sure to get the correct type, as they come in 2 and 4 pin and a variety of wattages. ideally just bring the old bulb with you. when replacing the new bulb into the light fitting it should only be possible to put it in one way. if you look at the shape at the back of the plastic centre piece and the shape where the pins are located on the light fitting it should be clear which way to install it.How do I remove and change a 2D lightbulb?With the switch off. hold each side of the central plastic square and pull straight outwards, get a replacement lamp of the same type, 16/28/38 watt, 2 or 4 pin, and plug it straight into the socket the correct way round. (I'm assuming that you have removed the cover from the light!! ??)How do I remove and change a 2D lightbulb?Take off the outer casing and reveal the tube. At the end of the tube housing there is a slip that will lift back far enough to allow you to release the two pins holding the tube. the other end will then slide out.It is a tricky job and worth getting someone in who knows what they are doing.How do I remove and change a 2D lightbulb?..A gentle twist should do the trick....... most are twist and lock in...........some are spring loaded on one end..... if the gentle twist doesn't work try moving back and forth.......careful..... if the bulb breaks..... the poison gas inside could blind you,,,,,,,,, if you still ant get it out...... ask a handy guy to help youHow do I remove and change a 2D lightbulb?You can find someone that can help you change it. Obviously that person will know how.How do I remove and change a 2D lightbulb?you usually just give it a good hard pull...if its a 2D fitting(usually stamped on lamp plastic bit in middle)How do I remove and change a 2D lightbulb?by giving it an onion
If i ask a question in yahoo answers then change my mind how do i remove the question?
if i submit a question in yahoo answers how do i remove the question if i change my mind?If i ask a question in yahoo answers then change my mind how do i remove the question?You just delete the question.. click on edit, then delete question. Kind of Ironic how you would ask a question like this
How i remove cyber security program that has disabled change/remove function on my comp.?
i mistakingly downloaded cyber security program.it won't let me do anything and they want $59.95. when i try to remove program it says this function has been disabled. somewhere i read i can get my computer to reset to the time i bought it and start fresh. it also said i can download an uninstall program but i don't know how to go about that. please somebody helpHow i remove cyber security program that has disabled change/remove function on my comp.?delete cyber security manually: http://www.spywarevoid.com/remove-cyber-
this way you don't need to download or buy programs.How i remove cyber security program that has disabled change/remove function on my comp.?At the first link below you will find instructions to remove CS
The second link provides written and video instructions as well as download link's to Malwarebytes.org It will be the detection and removal
tool used in this process. It is rated as the #1 malware/spyware detection
and removal software available. Follow all instructions carefully as to let you know that this is a serious infecton and the virus has the capability
of rewritting itself. Reinstalling the os will not work. It must be removed.
http://www.bleepingcomputer.com/virus-re
http://en.community.dell.com/wikis/spywaHow i remove cyber security program that has disabled change/remove function on my comp.?try this link.
http://www.spywareremovalblog.com/threatHow i remove cyber security program that has disabled change/remove function on my comp.?Follow manual removal tips or install the removal tool to get rid of Cyber Security thing: http://removeit.info/remove-cyber-securi .
This will helpHow i remove cyber security program that has disabled change/remove function on my comp.?Through the All Programs menu:
1. Click Start.
2. Point to All Programs.
3. Point to Accessories.
4. Point to System Tools.
5. Click System Restore.
this way you don't need to download or buy programs.How i remove cyber security program that has disabled change/remove function on my comp.?At the first link below you will find instructions to remove CS
The second link provides written and video instructions as well as download link's to Malwarebytes.org It will be the detection and removal
tool used in this process. It is rated as the #1 malware/spyware detection
and removal software available. Follow all instructions carefully as to let you know that this is a serious infecton and the virus has the capability
of rewritting itself. Reinstalling the os will not work. It must be removed.
http://www.bleepingcomputer.com/virus-re
http://en.community.dell.com/wikis/spywaHow i remove cyber security program that has disabled change/remove function on my comp.?try this link.
http://www.spywareremovalblog.com/threatHow i remove cyber security program that has disabled change/remove function on my comp.?Follow manual removal tips or install the removal tool to get rid of Cyber Security thing: http://removeit.info/remove-cyber-securi .
This will helpHow i remove cyber security program that has disabled change/remove function on my comp.?Through the All Programs menu:
1. Click Start.
2. Point to All Programs.
3. Point to Accessories.
4. Point to System Tools.
5. Click System Restore.
If I change the pulleys on a riding mower to make it faster do I HAVE to disconnect or remove the governor?
My friend is making his riding lawn mower fast, and I was wondering if I just change the pulleys would I have to remove the governor, because I've heard some bad things about removing it or disconnecting it.If I change the pulleys on a riding mower to make it faster do I HAVE to disconnect or remove the governor?NO, you do not have to remove or disable the governor.
By putting a smaller pulley on the engine output shaft and/or a larger pulley on the %26quot;driven%26quot; shaft, you will get the ground speed increase without any change to the engine.
In fact, do NOT change the governor in ANY WAY!!!!!! The governor is there for two purposes:
1. To limit the maximum Rpm of the engine to protect if from destroying itself by %26quot;over-revving,%26quot; and
2. To open the throttle more as loads increase to maintain as close a possible an even, PRESET Rpm at all times.
Also, do NOT run the engine at throttle settings other than %26quot;wide-open%26quot; as most small engines do not have lubricating oil pumps, and depend on that preset Rpm to %26quot;splash%26quot; oil all over the inside of the engine to provide adequate lubrication of all interior engine parts.
This issue is so critical that Briggs-Stratton will not honor the warranty on a failed engine if there is evidence of tampering with the governor system!!!!!If I change the pulleys on a riding mower to make it faster do I HAVE to disconnect or remove the governor?I over rode the governor on a mower one time and blew the motor if that gives you a hint as to what will probably happen. I wasn't trying to go faster..just trying to power my way through some high grass and bang.If I change the pulleys on a riding mower to make it faster do I HAVE to disconnect or remove the governor?No if you change the size of the pulleys. Smaller drive pulleys will spin faster than bigger diameter pulleys.If I change the pulleys on a riding mower to make it faster do I HAVE to disconnect or remove the governor?No, you don't have to remove the governor. But bushwacker has it backwards on the pulleys. You want the larger pulley on the engine and smaller one on the transaxle to make it go faster.
By putting a smaller pulley on the engine output shaft and/or a larger pulley on the %26quot;driven%26quot; shaft, you will get the ground speed increase without any change to the engine.
In fact, do NOT change the governor in ANY WAY!!!!!! The governor is there for two purposes:
1. To limit the maximum Rpm of the engine to protect if from destroying itself by %26quot;over-revving,%26quot; and
2. To open the throttle more as loads increase to maintain as close a possible an even, PRESET Rpm at all times.
Also, do NOT run the engine at throttle settings other than %26quot;wide-open%26quot; as most small engines do not have lubricating oil pumps, and depend on that preset Rpm to %26quot;splash%26quot; oil all over the inside of the engine to provide adequate lubrication of all interior engine parts.
This issue is so critical that Briggs-Stratton will not honor the warranty on a failed engine if there is evidence of tampering with the governor system!!!!!If I change the pulleys on a riding mower to make it faster do I HAVE to disconnect or remove the governor?I over rode the governor on a mower one time and blew the motor if that gives you a hint as to what will probably happen. I wasn't trying to go faster..just trying to power my way through some high grass and bang.If I change the pulleys on a riding mower to make it faster do I HAVE to disconnect or remove the governor?No if you change the size of the pulleys. Smaller drive pulleys will spin faster than bigger diameter pulleys.If I change the pulleys on a riding mower to make it faster do I HAVE to disconnect or remove the governor?No, you don't have to remove the governor. But bushwacker has it backwards on the pulleys. You want the larger pulley on the engine and smaller one on the transaxle to make it go faster.
Poll: If you could change/remove one law/amendment in the United States, what would that be?
Doesn't matter if its going to make America better or for personal gain.
I wouldn't make any changes, for I know more problems would occur anyways.Poll: If you could change/remove one law/amendment in the United States, what would that be?Everyone must go jump off a cliff.external hard disk Can I wash a bed comforter with feathers in it
I wouldn't make any changes, for I know more problems would occur anyways.Poll: If you could change/remove one law/amendment in the United States, what would that be?Everyone must go jump off a cliff.
How do you remove the hub to change the rotor what tool do you use?
i have a 4wd 88 gmc sierra and i can't figure out what you need to remove the hud to change the rotor help me someoneHow do you remove the hub to change the rotor what tool do you use?Will more and likely need a special tool that is for 4x4's...not sure of the name of it though.How do you remove the hub to change the rotor what tool do you use?This requires more tools than the vehicle is worth. Try to find a shop do do it for you and save you the expense of setting up your own shop.
I have a smoke alarm that needs a special key to remove and change the battery.?
It was installed by Quell in the late nineties and is model # 370MBXT. I do not have the key and want to know if there is a way to take the battery out without the key?I have a smoke alarm that needs a special key to remove and change the battery.?I would just get rid of it and put in a modern alarm where you can change the battery easily.
There is nothing more dangerous than a smoke alarm with a dead battery so if it is easy to change you can change it annually on your birthday say.
I think they are more advanced and more reliable now too so treat your family to a new oneI have a smoke alarm that needs a special key to remove and change the battery.?try this website it seems to have some good imfo
www.brightideas.
com.au/index.php?e=398%26amp;p=quell
hope thats of some help to you
There is nothing more dangerous than a smoke alarm with a dead battery so if it is easy to change you can change it annually on your birthday say.
I think they are more advanced and more reliable now too so treat your family to a new oneI have a smoke alarm that needs a special key to remove and change the battery.?try this website it seems to have some good imfo
www.brightideas.
com.au/index.php?e=398%26amp;p=quell
hope thats of some help to you
What do i need to remove to change the exhaust header gasket?
i have a leak in the gaske at the headers on my jeep i was wondering if i have to remove the intake to change the gasket on the headerWhat do i need to remove to change the exhaust header gasket?I assume you have a in-line six. Yes, the intake has to be removed. Be sure to double check the headers for cracks, and exhaust stud bolts for damage or missing. There is not enough info about your vehicle, but it does sound like a common problem with jeeps. What do i need to remove to change the exhaust header gasket?First make it easy on yourself!!!!!
I always use exaust manifold gaskets they don't burn out every year. OKAY,one side or one header first.
Remove all the bolts except the outer most one. One on each end. The two remaining bolts should be loosened so the header can be slid or spaced away from the head. Now you can remove the old gasket and all the gasket material.
Now you can drop the new gasket into place. Most header gaskets have the outer most holes slotted, if yours are not slotted, you can slot them to ease installation.
Replace and tightened all the bolts and inspect for leaks!
%26quot;BRILLIANT%26quot;!!!!What do i need to remove to change the exhaust header gasket?You would have to remove the header to get to the gasket under it.What do i need to remove to change the exhaust header gasket?no you just have to remove the header bolts and usually they have nough play in the headers to remove the gasket and put the new one in there....What do i need to remove to change the exhaust header gasket?no you don't have to remove the intake, you just need to take the header off and put a new gasket under it.
I always use exaust manifold gaskets they don't burn out every year. OKAY,one side or one header first.
Remove all the bolts except the outer most one. One on each end. The two remaining bolts should be loosened so the header can be slid or spaced away from the head. Now you can remove the old gasket and all the gasket material.
Now you can drop the new gasket into place. Most header gaskets have the outer most holes slotted, if yours are not slotted, you can slot them to ease installation.
Replace and tightened all the bolts and inspect for leaks!
%26quot;BRILLIANT%26quot;!!!!What do i need to remove to change the exhaust header gasket?You would have to remove the header to get to the gasket under it.What do i need to remove to change the exhaust header gasket?no you just have to remove the header bolts and usually they have nough play in the headers to remove the gasket and put the new one in there....What do i need to remove to change the exhaust header gasket?no you don't have to remove the intake, you just need to take the header off and put a new gasket under it.
I would like to be able to remove and change the background in photos I take,can anybody recomend any programs?
I also would like to add text in different colours and fonts to the photos. Does anyone know of a simple %26amp; free program that can do this and is easy to use. Or should I think about buying PhotoShop Elements 8. Thank you in advance for any answers put forward.I would like to be able to remove and change the background in photos I take,can anybody recomend any programs?Yes you should use Photoshop It is the best for changing or editing photos U don't have to buy it Get it from Adobe's Website for free....I would like to be able to remove and change the background in photos I take,can anybody recomend any programs?Try Gimp: www.gimp.org
Or try Paint.net: http://www.getpaint.net/
Don't waste your money when you can do the same thing for free and it's better too.
Or try Paint.net: http://www.getpaint.net/
Don't waste your money when you can do the same thing for free and it's better too.
How can I change/remove tabs in beta mail?
I do not like the %26quot;home%26quot; tab. The same info %26amp; subjects are on the main Yahoo page. When I go to my mail account I want to read my mail, not look at news headlines.How can I change/remove tabs in beta mail?Unfortunately, the home tab is always the first tab that you will see when you open the Yahoo Mail Beta and there is no option to how to change it to a different one, only that you can click on anything on the mailbox and it will tabbed it on top so you can alternate which tab to go to. It is best to also try submitting a feedback for the Beta before clicking on switch back and before you will be returned to original Yahoo Mail. At least you can send your comments to Yahoo, they may try to do something about the home tab. Goodluck!How can I change/remove tabs in beta mail?I will be watching this question. I DO NOT like the home tab either. In fact I don't like tabs at all.How can I change/remove tabs in beta mail?Iwant To Delete Yahoo! Beta Mailfavorite shampoo hair conditioner hair dresser cut
How do i change from caged bearings in my bikes headset to sealed ones? do i have to remove/change anything?
I have a Merida sub-20 bike. can i use sealed units? if so, what size should i use?
I want to change to sealed bearings to make it easier to replace/fix.
many thanksHow do i change from caged bearings in my bikes headset to sealed ones? do i have to remove/change anything?You will have to switch out the headset to go from caged to sealed bearings.
Most modern bicycles come with a 1.125%26quot;, also known as 1 1/8 inch headset. It would be a very odd late model bike that would come with a 1%26quot; headset.
If you want to replace it yourself check out the links below for all sorts of useful information.
Remember that most of the race cups into which the bearings fit are aluminum and are relatively soft so use wood or a special tool to install correctly.
Headsets are definitely one area where a bigger hammer does not work. Setting the star nut requires a lot of patience or a special tool, so think about having a shop swap the headset. It's a common repair and with the right tools reasonably quick.
Best of luck!How do i change from caged bearings in my bikes headset to sealed ones? do i have to remove/change anything?Change the hubs to ones that used sealed bearings. That means rebuilding the wheels, though.How do i change from caged bearings in my bikes headset to sealed ones? do i have to remove/change anything?You will have to buy a new headset with sealed bearings if you want to do this. However, if your current headset is in good shape, simply servicing it will keep it in good shape for years.How do i change from caged bearings in my bikes headset to sealed ones? do i have to remove/change anything?it can also make it smoother is you don't use the cage and use the bearing free but that will require a few more bearings
I want to change to sealed bearings to make it easier to replace/fix.
many thanksHow do i change from caged bearings in my bikes headset to sealed ones? do i have to remove/change anything?You will have to switch out the headset to go from caged to sealed bearings.
Most modern bicycles come with a 1.125%26quot;, also known as 1 1/8 inch headset. It would be a very odd late model bike that would come with a 1%26quot; headset.
If you want to replace it yourself check out the links below for all sorts of useful information.
Remember that most of the race cups into which the bearings fit are aluminum and are relatively soft so use wood or a special tool to install correctly.
Headsets are definitely one area where a bigger hammer does not work. Setting the star nut requires a lot of patience or a special tool, so think about having a shop swap the headset. It's a common repair and with the right tools reasonably quick.
Best of luck!How do i change from caged bearings in my bikes headset to sealed ones? do i have to remove/change anything?Change the hubs to ones that used sealed bearings. That means rebuilding the wheels, though.How do i change from caged bearings in my bikes headset to sealed ones? do i have to remove/change anything?You will have to buy a new headset with sealed bearings if you want to do this. However, if your current headset is in good shape, simply servicing it will keep it in good shape for years.How do i change from caged bearings in my bikes headset to sealed ones? do i have to remove/change anything?it can also make it smoother is you don't use the cage and use the bearing free but that will require a few more bearings
How do you remove the headlight housing to change a turn signal bulb in a ford focus?
I've removed the two screws on top, but the black casing won't move so I can get between it and the lights to change the bulb.How do you remove the headlight housing to change a turn signal bulb in a ford focus?There must be a third *extended hex bolt buried down inside the headlight housing. It's there you just have to find it. Wish I could help ya! You've got the right idea as the entire headlight housing has to drop out to service the headlights and turn signals.
If you really get stuck, go to a library and look up your specific model car in a Motors or Chilton's *big thick book.How do you remove the headlight housing to change a turn signal bulb in a ford focus?Hi, The cover should pullout enough to get at the bulb.Please go to the web site (ehow.com) and put in search for how to change front turn signal light for Ford focus. It will give you step by step directions .Good Luck.How do you remove the headlight housing to change a turn signal bulb in a ford focus?Check your owner's manual. It may show you how to do that and where your missing screw is.
If you really get stuck, go to a library and look up your specific model car in a Motors or Chilton's *big thick book.How do you remove the headlight housing to change a turn signal bulb in a ford focus?Hi, The cover should pullout enough to get at the bulb.Please go to the web site (ehow.com) and put in search for how to change front turn signal light for Ford focus. It will give you step by step directions .Good Luck.How do you remove the headlight housing to change a turn signal bulb in a ford focus?Check your owner's manual. It may show you how to do that and where your missing screw is.
Jeep 4.0, cam change, completely remove the head or can you just take out the distributor and pushrods?
Got a crane cam and I don't feel like pulling the engine out or completely removing the head(and all the crap attached) to put it another cam. My ride is a 1999 jeep cherokee 4.0LJeep 4.0, cam change, completely remove the head or can you just take out the distributor and pushrods?if you can do it without pulling the engine, you are a good man and a better mechanic than me.Jeep 4.0, cam change, completely remove the head or can you just take out the distributor and pushrods?You have to pull at least the intake and the rocker arms, because you have to remove the lifters to get the cam in and out. It can be done in the car, but you have have to remove the radiator, A/C condensor, etc, to get clearance.Jeep 4.0, cam change, completely remove the head or can you just take out the distributor and pushrods?should be able to just take off the intake,the pushrods and lifters,and the timing cover,check the cam bearings if they're scored you will have to replace the bearings and with the tools you will need you may wanna take the engine out and have the bearings replaced by a machine shop.if not be extremely careful taking the old one out and putting the new cam in,you can score the bearings,dont forget to set the timing a little off i think it would be to retard the timing by 3 degreesJeep 4.0, cam change, completely remove the head or can you just take out the distributor and pushrods?!
HOWEVER-Now that i went ot the Alldata site and looked the procedure up, there's not enough room to get the lifters out without pulling the head-which really isn't that big a deal on that JeepJeep 4.0, cam change, completely remove the head or can you just take out the distributor and pushrods?1999 Jeep Truck Cherokee 4WD L6-4.0L VIN S
Vehicle Level Engine, Cooling and Exhaust Engine Camshaft Service and Repair
Service and Repair
Notes
The content of this article reflects changes called for in TSB 26-11-98.
REMOVAL
WARNING: THE COOLANT IN A RECENTLY OPERATED ENGINE IS HOT AND PRESSURIZED. RELEASE THE PRESSURE BEFORE REMOVING THE DRAIN COCK, CAP AND DRAIN PLUGS.
Disconnect negative cable from battery.
Drain the cooling system. DO NOT waste reusable coolant. If the solution is clean, drain it into a clean container for reuse.
Remove the radiator or radiator and condenser, if equipped with A/C (refer to Cooling System for the proper procedure).
Remove the distributor cap and mark the position of the rotor.
Remove the distributor and ignition wires.
Remove the engine cylinder head cover.
Remove the rocker arms, bridges and pivots.
Remove the push rods.
Remove the engine cylinder head and gasket.
Remove the hydraulic valve tappets from the engine cylinder block.
Remove the vibration damper.
Remove the timing case cover.
Remove the timing chain and sprockets.
Remove the front bumper and/or grille, as required.
Fig. 43
Remove the two thrust plate retaining screws, thrust plate, and camshaft.
INSTALLATION
Inspect the cam lobes for wear.
Inspect the bearing journals for uneven wear pattern or finish.
Inspect the bearings for wear.
Inspect the distributor drive gear for wear.
If the camshaft appears to have been rubbing against the thrust washer, examine the oil pressure relief holes in the rear cam journal. The oil pressure relief holes must be free of debris.
Lubricate the camshaft with Mopar Engine Oil Supplement, or equivalent.
Carefully install the camshaft to prevent damage to the camshaft bearings (Fig. 43).
Position the thrust plate and install the retaining screws. Tighten screws to 24 Nm (18 ft.lbs.) .
Install the timing chain, crankshaft sprocket and camshaft sprocket with the timing marks aligned.
Install the camshaft sprocket bolt/cup washer. Tighten the bolt to 68 Nm (50 ft.lbs.) .
Fig. 44
Install the timing case cover with a replacement oil seal (Fig. 44). Refer to Timing Case Cover Installation.
Install the vibration damper (Fig. 44).
Install the hydraulic valve tappets.
Install the cylinder head gasket with the numbers facing up.
Install the cylinder head and head bolts (Refer to Cylinder Head; Removal and Installtion for torque values and tightening sequence).
Install the push rods.
Install the rocker arms and pivot and bridge assemblies. Tighten each of the capscrews for each bridge alternately, one turn at a time, to avoid damaging the bridge.
Install the engine cylinder head cover.
Position the oil pump gear. Refer to Powertrain Management; Ignition Systems.
Install the distributor and ignition wires. Refer to Powertrain Management; Ignition Systems.
Install the serpentine drive belt and tighten to the specified tension. NOTE: During installation, lubricate the hydraulic valve tappets and all valve components with Mopar Engine Oil Supplement, or equivalent. The Mopar Engine Oil Supplement, or equivalent must remain with the engine oil for at least 1609 km (1,000 miles). The oil supplement need not be drained until the next scheduled oil change.
Install the A/C condenser and receiver/drier assembly, if equipped (refer to Heating and Air Conditioning). CAUTION: Both service valves must be opened before the air conditioning system is operated.
Install the radiator, connect the hoses and fill the cooling system to the specified level (refer to Cooling System for the proper procedure).
Check the ignition timing and adjust as necessary.
Install the grille and bumper, if removed.
Connect negative cable to battery.Jeep 4.0, cam change, completely remove the head or can you just take out the distributor and pushrods?Yeah, if it was a V8, on most all of them you could just pull off the intake manifold to get at the lifters. About the only straight 6 I can think of that you might be able to avoid taking off the head, is I think you could do that from the access cover on the side of the old Ford 300 ci motor.
So basically, the head, all the stuff on the front of the motor, and the radiator and grill are gonna have to go. Unless you got some pretty large passages above the lifters, that are big enough to lift them through with an extractor tool.
I think this is the one I have.
http://www.kd-tools.com/2114.htm
HOWEVER-Now that i went ot the Alldata site and looked the procedure up, there's not enough room to get the lifters out without pulling the head-which really isn't that big a deal on that JeepJeep 4.0, cam change, completely remove the head or can you just take out the distributor and pushrods?1999 Jeep Truck Cherokee 4WD L6-4.0L VIN S
Vehicle Level Engine, Cooling and Exhaust Engine Camshaft Service and Repair
Service and Repair
Notes
The content of this article reflects changes called for in TSB 26-11-98.
REMOVAL
WARNING: THE COOLANT IN A RECENTLY OPERATED ENGINE IS HOT AND PRESSURIZED. RELEASE THE PRESSURE BEFORE REMOVING THE DRAIN COCK, CAP AND DRAIN PLUGS.
Disconnect negative cable from battery.
Drain the cooling system. DO NOT waste reusable coolant. If the solution is clean, drain it into a clean container for reuse.
Remove the radiator or radiator and condenser, if equipped with A/C (refer to Cooling System for the proper procedure).
Remove the distributor cap and mark the position of the rotor.
Remove the distributor and ignition wires.
Remove the engine cylinder head cover.
Remove the rocker arms, bridges and pivots.
Remove the push rods.
Remove the engine cylinder head and gasket.
Remove the hydraulic valve tappets from the engine cylinder block.
Remove the vibration damper.
Remove the timing case cover.
Remove the timing chain and sprockets.
Remove the front bumper and/or grille, as required.
Fig. 43
Remove the two thrust plate retaining screws, thrust plate, and camshaft.
INSTALLATION
Inspect the cam lobes for wear.
Inspect the bearing journals for uneven wear pattern or finish.
Inspect the bearings for wear.
Inspect the distributor drive gear for wear.
If the camshaft appears to have been rubbing against the thrust washer, examine the oil pressure relief holes in the rear cam journal. The oil pressure relief holes must be free of debris.
Lubricate the camshaft with Mopar Engine Oil Supplement, or equivalent.
Carefully install the camshaft to prevent damage to the camshaft bearings (Fig. 43).
Position the thrust plate and install the retaining screws. Tighten screws to 24 Nm (18 ft.lbs.) .
Install the timing chain, crankshaft sprocket and camshaft sprocket with the timing marks aligned.
Install the camshaft sprocket bolt/cup washer. Tighten the bolt to 68 Nm (50 ft.lbs.) .
Fig. 44
Install the timing case cover with a replacement oil seal (Fig. 44). Refer to Timing Case Cover Installation.
Install the vibration damper (Fig. 44).
Install the hydraulic valve tappets.
Install the cylinder head gasket with the numbers facing up.
Install the cylinder head and head bolts (Refer to Cylinder Head; Removal and Installtion for torque values and tightening sequence).
Install the push rods.
Install the rocker arms and pivot and bridge assemblies. Tighten each of the capscrews for each bridge alternately, one turn at a time, to avoid damaging the bridge.
Install the engine cylinder head cover.
Position the oil pump gear. Refer to Powertrain Management; Ignition Systems.
Install the distributor and ignition wires. Refer to Powertrain Management; Ignition Systems.
Install the serpentine drive belt and tighten to the specified tension. NOTE: During installation, lubricate the hydraulic valve tappets and all valve components with Mopar Engine Oil Supplement, or equivalent. The Mopar Engine Oil Supplement, or equivalent must remain with the engine oil for at least 1609 km (1,000 miles). The oil supplement need not be drained until the next scheduled oil change.
Install the A/C condenser and receiver/drier assembly, if equipped (refer to Heating and Air Conditioning). CAUTION: Both service valves must be opened before the air conditioning system is operated.
Install the radiator, connect the hoses and fill the cooling system to the specified level (refer to Cooling System for the proper procedure).
Check the ignition timing and adjust as necessary.
Install the grille and bumper, if removed.
Connect negative cable to battery.Jeep 4.0, cam change, completely remove the head or can you just take out the distributor and pushrods?Yeah, if it was a V8, on most all of them you could just pull off the intake manifold to get at the lifters. About the only straight 6 I can think of that you might be able to avoid taking off the head, is I think you could do that from the access cover on the side of the old Ford 300 ci motor.
So basically, the head, all the stuff on the front of the motor, and the radiator and grill are gonna have to go. Unless you got some pretty large passages above the lifters, that are big enough to lift them through with an extractor tool.
I think this is the one I have.
http://www.kd-tools.com/2114.htm
How To Remove Or Change Keyboard Keys On Windows 7?
I recently got a new dell laptop and there is a connection button on the keyboard that I always accidently press. This causes me to disconnect and have to reconnect. It is very annoying when playing online computer games. I am wondering if there is a way to prevent this problem from happening in the future.How To Remove Or Change Keyboard Keys On Windows 7?Well, the keys themselves are made to be removed if need-be.
But keep in mind they are very fragile, so you could break the key if you remove it. That is not a huge deal, because you can still hit the button with the key off, it will just be a little bit harder to do than normal.
Not a big problem for you, though, as it will likely solve your problem.
Just use a dime or something underneath the key, and pry it up and to the side.
But keep in mind they are very fragile, so you could break the key if you remove it. That is not a huge deal, because you can still hit the button with the key off, it will just be a little bit harder to do than normal.
Not a big problem for you, though, as it will likely solve your problem.
Just use a dime or something underneath the key, and pry it up and to the side.
How do you change or remove the front brakes on '66 Dodge Polara?
A Haynes manual would be great to have but I doubt you can buy a new one today, you could possibly get one off ebay. Having said that, the suggestion to take the drums off on each side and compare as you do one side is probably the best idea. Front drums are not hard to do, the key is to be careful and take your time. As you take off a piece lay it on the ground as it is positioned on the backing plate making sure it is oriented correctly. The springs are the most difficult pieces to work with, they are extremely strong and will can cause serious injury if they hit you. If you are somewhat mechanically inclined I suspect you can do the job with minimal trouble.How do you change or remove the front brakes on '66 Dodge Polara?If i remember correctly...it has drum brakes on the front like a lot of new cars have on the rear.... Look at a book on the REAR brakes of any chrysler vehicle...they are held mostly by strong springs. Get a BIG pair of pliars and a big screwdriver...jack up the front end take off BOTH front wheels and drums and look at one to see how the OTHER goes every step of the way. you can't go wrong with a pattern to go by like that....good luck.How do you change or remove the front brakes on '66 Dodge Polara?no disc brakes on that model, there drum brakes, you have to take all the springs off and pull the shoes off and rebuild the wheel cylinders or replace them, best to do 1 wheel at a time as then you can look at the other wheel for reference to put back together, you need to get a chiltons manual for that year dodge as all the models in 66 had the same system as dodge didn't start coming out with disc brakes until 67 and that was an option, if you never have done drum brakes it's very intimidating but not that hard, I worked for a dodge dealership in 66 and did them daily after school in the evening and in 67 when they came out with the disc brakes I was lost until a mechanic taught me how to do them, I couldn't believe how easy they were to do.How do you change or remove the front brakes on '66 Dodge Polara?Like most of the cars of the era, the drums are held on by a big nut, which is torqued to a specific value (not really tight, because it has conical wheel bearings). The washer under the nut should be able to be moved when pried. Anyway, a cotter pin and castle nut top off that nut and keep it from backing off.
Be sure you can obtain new brake shoes and new springs (if you need them). Take digital pics from several angles before you disassemble, and print them out to refer to.
I use Vise Grips to pull the springs off. A good strong screwdriver helps to pry springs off, too.
When you reassemble, be sure to repack the front wheel bearings with fresh bearing grease, and put some anti-sieze compound on the star adjusters' (if applicable) inside threads (just don't get it anywhere near the shoes!).
Lastly, pay attention to the lengths of the shoes. I believe the longer shoe goes toward the rear, but NOTICE that before you pull them apart.How do you change or remove the front brakes on '66 Dodge Polara?I have a 1972 Satalite with 4 wheel drum brakes and there should be a large castle nut locked in place with a cotter pin (with a washer underneith) This is tightened to a specific torque (tighness value) This nut preloads the wheel bearing which should be cleaned and packed with fresh grease every so often. One bearing will fall out the front and the other falls out the back (once you remove the wheel seal). I normally do one side at a time using the other side as a reference and as metioned in another answer, on the brake shoes the fricton material should be 2 different lengths, keep track which one goes where. Also when assembling make sure wheel bearing is tightened correctly (not too tight not too loose).
Be sure you can obtain new brake shoes and new springs (if you need them). Take digital pics from several angles before you disassemble, and print them out to refer to.
I use Vise Grips to pull the springs off. A good strong screwdriver helps to pry springs off, too.
When you reassemble, be sure to repack the front wheel bearings with fresh bearing grease, and put some anti-sieze compound on the star adjusters' (if applicable) inside threads (just don't get it anywhere near the shoes!).
Lastly, pay attention to the lengths of the shoes. I believe the longer shoe goes toward the rear, but NOTICE that before you pull them apart.How do you change or remove the front brakes on '66 Dodge Polara?I have a 1972 Satalite with 4 wheel drum brakes and there should be a large castle nut locked in place with a cotter pin (with a washer underneith) This is tightened to a specific torque (tighness value) This nut preloads the wheel bearing which should be cleaned and packed with fresh grease every so often. One bearing will fall out the front and the other falls out the back (once you remove the wheel seal). I normally do one side at a time using the other side as a reference and as metioned in another answer, on the brake shoes the fricton material should be 2 different lengths, keep track which one goes where. Also when assembling make sure wheel bearing is tightened correctly (not too tight not too loose).
How to remove r change a write protected file ?
My memory card(sd) is write protected. I could not delete , copy and any operations.I want to add some songs on it.plsTel the solution.How to remove r change a write protected file ?read the help section pertaining to your card, and, you might also do a properties, and see if you can change your write protection there.. a lot of times, cards or files, are read only, but, if you can, as I said, under Properties, you should see a box that is checked, and reads Read Only, uncheck that box, and then click Apply, then click Okay, and that should fix the problem.. How to remove r change a write protected file ?there is a slider on the side of the SD card that write protects it move it and you should be able to read/write them!How to remove r change a write protected file ?On the side of SD card's there is a little switch, make sure it isn't set to lockHow to remove r change a write protected file ?HI Friend,
U can see a small White slide button on the side of the SD card jsut slide it and u can work accordingly.
U can see a small White slide button on the side of the SD card jsut slide it and u can work accordingly.
When I change my OS it will remove my installed programs?
I will change my Vista to Windows 7 RC1. This is my first OS change in my life and i'd like to know, that what happens with my programs on my laptop. If i have trend micro security it will be removed?When I change my OS it will remove my installed programs?If you are upgrading... Nothing will happen. I have done this 3 - 4 time. With all the program and all the documents.. even with Windows Beta... its a wonderful transfer... everything worked as it should be.When I change my OS it will remove my installed programs?I've done this many times. First of all, I don't think you can upgrade from windows vista to windows 7. I think you got to format the hard drive to have a proper installation of windows 7.When I change my OS it will remove my installed programs?If you make a upgrade you wont lose anything.If you do a clean install you will lose those programs.When I change my OS it will remove my installed programs?dual boot
http://lifehacker.com/5126781/how-to-dua
http://lifehacker.com/5126781/how-to-dua
Is it a physical or chemical change to remove water from a hydrate?
Blah, chemistry.Is it a physical or chemical change to remove water from a hydrate?I would say physical in most cases.
The water will he held by weak bonds (hydrogen etc) and not ionic or covalent bonds. So you don't change the molecular structure of the remaining materal just how it's organised.
Regards
LIs it a physical or chemical change to remove water from a hydrate?depends how your removing it
The water will he held by weak bonds (hydrogen etc) and not ionic or covalent bonds. So you don't change the molecular structure of the remaining materal just how it's organised.
Regards
LIs it a physical or chemical change to remove water from a hydrate?depends how your removing it
How do I edit my mailing list, add/remove or change/?
Your instruction say I should have x,y and z but if I do not have x,y or z how do I add or remove people from my mailing list?
Jim Miller
Jvrmiller@aol.com
PS: Have had this account for many years and this is the worest change over I have every seen! Sargastic remark: Who was the brain child behind this one, the old method was better and hotmail is also bette, why are people changing?How do I edit my mailing list, add/remove or change/?Maybe you've already tried this. I'm using Yahoo Mail, but it might be similar in aol.
Click Contacts to open your address book.
1. To remove a contact, check the box next to it, go to the top of the page and click the Delete button.
2. To add a contact, there should be a form to fill out with a name and email address, then click the Add button.
3. To change information/edit a contact, click the little blue Edit link at the end of the contact's name to open a window and edit, then save.celebrity hair does anyone know
Jim Miller
Jvrmiller@aol.com
PS: Have had this account for many years and this is the worest change over I have every seen! Sargastic remark: Who was the brain child behind this one, the old method was better and hotmail is also bette, why are people changing?How do I edit my mailing list, add/remove or change/?Maybe you've already tried this. I'm using Yahoo Mail, but it might be similar in aol.
Click Contacts to open your address book.
1. To remove a contact, check the box next to it, go to the top of the page and click the Delete button.
2. To add a contact, there should be a form to fill out with a name and email address, then click the Add button.
3. To change information/edit a contact, click the little blue Edit link at the end of the contact's name to open a window and edit, then save.
How do I remove the tyre from the rim to change the tube inside a car tire ?
I bought a new tube to change it on my flat car tire. But I don't know how to remove (and reinstall) the tire from the rim. I thought that was as simple as on a bicycle.How do I remove the tyre from the rim to change the tube inside a car tire ?You have to break the bead (the area where the tire contacts the rim). You can break it with a tire hammer or take it to the local station, tire store and pay them to do it.How do I remove the tyre from the rim to change the tube inside a car tire ?No not that easy you need to take it to your nearest tire co. and they will fix it for a fee, you cannot change tube you don't have the right tool , It will take them about 5 min to do the job. hope this helps.How do I remove the tyre from the rim to change the tube inside a car tire ?you can't, you have to go to a tire place, they have a machine for thatHow do I remove the tyre from the rim to change the tube inside a car tire ?The way ive gotten tires off the rim is take the tire off the vehicle and lay it flat on the ground. Remove the neddle from the valve stem, and if u can use another vehicle and run over the tire with the front tires of the drivable one to break the bead (where the rim meets the tire). . then with two pry bars you should b able to pry the tire over the rim. install the tube apply soapy water to the tire and rim use one pry bar to get the tire started and the other to go around prying it in good luckHow do I remove the tyre from the rim to change the tube inside a car tire ?run it over with another car watch that you only roll over the tire not the rim turn the steering wheel as you goHow do I remove the tyre from the rim to change the tube inside a car tire ?I tried it once - it's fun if you like experimenting and a do-it-yourself kinda guy and have the right tools. If not - take it a shop.How do I remove the tyre from the rim to change the tube inside a car tire ?STOP AND TAKE IT TO A SHOP.........
How to remove/change headlight on 206?
I don't mean the bulb, the whole headlight. As my passenger side light has broken where the clip holds the bulb in, so I've got some new headlights, gti crystal one's, my current ones are those crappy clouded standard ones.How to remove/change headlight on 206?First and foremost, make sure the headlights are compatible - that is they are the same size, have the same number of clip holds. Then you open the hood and you try to find the clips that hold the headlight and unscrew them... there might be some clips near the bumper and you may have to take down the bumper to unscrew the headlight from there. Then, follow the steps in reverse and don't forget to put the power lines back in place. It's easy.
Remove or change country of citizenship from US Travel Document?
I am trying to get a Travel document and I wonder if it is possible to remove the place where citizenship is mentioned.Remove or change country of citizenship from US Travel Document?No, citizenship is the most basic piece of international travel. If a form from a government asks you to name your citizenship, you must. Lying about it can get you banned for life from the US.Remove or change country of citizenship from US Travel Document?I am not sure I understand the question.
Are you talking about a field on a form for the Travel Document?
If you are filling out a form, you must answer ALL questions on the form. You can't just decide to answer the questions that you want.
If you leave the field blank, you will almost certainly be rejected, and you would have wasted the cost of the filing fee. If you lie and say you are a citizen of a country when you really aren't, you've just committed fraud and there will be penalties.
The US is not going to admit you if you don't state your country of nationality. It doesn't work that way.
Are you talking about a field on a form for the Travel Document?
If you are filling out a form, you must answer ALL questions on the form. You can't just decide to answer the questions that you want.
If you leave the field blank, you will almost certainly be rejected, and you would have wasted the cost of the filing fee. If you lie and say you are a citizen of a country when you really aren't, you've just committed fraud and there will be penalties.
The US is not going to admit you if you don't state your country of nationality. It doesn't work that way.
How much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?
I want to change my thermostat, I'm wondering how much coolant I'll have to take out, so I have a container to store it. 2001 Accent, 1.6LHow much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?completely drain it and replace coolant while your there ...coolants are cheap...get empty milk jugs and such..
How much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?the cost of the thermostat costs more than the value of ur vehicle so it's totaled i think.....How much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?all of it, check your owners manual for capacity specsHow much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?I don't know that car, but if it's on top, you won't need any, if it's on the side, alots going to drain out, you will have to catch it and put it back in, if it's on the bottom, then it's all going to drain out, just use a pan or a couple of pans, (oil pans) you can add some water if you spill any, most people use too much antifreeze anyway for California.How much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?Whatever comes out of the hose with the thermostat will be enoughHow much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?not all of it yet you need to see where it some time it up top somtime its down so buy knowin that you can determine how must remember if you see rust in the system check for waterpump take the thermostat out so they whole system its flushHow much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?just drain it down past the top hose. you are bound to lose some anti-freeze, but not alot.How much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?Antifreeze wears out over time, on the radiator there is a pet cock that you unscrew to catch the antifreeze with it will be between 1 to 2 gallons of fluid, the petcock normally is just under the lower radiator hose, it will look like a T with a hole in the middle you may have to use pliers to turn it one way then the other to break it loose, take radiator cap off first unscrew the petcock and let the fluid drain out completely, you may spill some at first cause the fluid may not run where you think it's going to. mix the anti freeze 50/50 half water and half coolent.
How much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?the cost of the thermostat costs more than the value of ur vehicle so it's totaled i think.....How much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?all of it, check your owners manual for capacity specsHow much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?I don't know that car, but if it's on top, you won't need any, if it's on the side, alots going to drain out, you will have to catch it and put it back in, if it's on the bottom, then it's all going to drain out, just use a pan or a couple of pans, (oil pans) you can add some water if you spill any, most people use too much antifreeze anyway for California.How much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?Whatever comes out of the hose with the thermostat will be enoughHow much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?not all of it yet you need to see where it some time it up top somtime its down so buy knowin that you can determine how must remember if you see rust in the system check for waterpump take the thermostat out so they whole system its flushHow much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?just drain it down past the top hose. you are bound to lose some anti-freeze, but not alot.How much coolant should I need to remove to change thermostat? 2001 Hyundai Accent?Antifreeze wears out over time, on the radiator there is a pet cock that you unscrew to catch the antifreeze with it will be between 1 to 2 gallons of fluid, the petcock normally is just under the lower radiator hose, it will look like a T with a hole in the middle you may have to use pliers to turn it one way then the other to break it loose, take radiator cap off first unscrew the petcock and let the fluid drain out completely, you may spill some at first cause the fluid may not run where you think it's going to. mix the anti freeze 50/50 half water and half coolent.
When is the best time to remove or change the bar of an industrial piercing?
I got my industrial piercing 3 weeks ago and my ear is no longer creating crusties or hurting besides when it is bumped. I just wanted to know if this is a good time to take out my bar or even change into another one? and if this is not a good time to do either how much longer should i wait?When is the best time to remove or change the bar of an industrial piercing?I've had mine since February and I first changed it in July so it was 5 months until I first changed mine.
but they say to wait at least 3 months for a cartilage piercing, even though it may feel ok, you might irritate something by removing the barbell so my advice is to wait about 2 more month to be on the safe side. :)When is the best time to remove or change the bar of an industrial piercing?you can probably change it now..
i have my industrial and i always changed it after i got it pierced.
ive had it for about 9 months and its perfect.
just make sure you clean it after the first few days when you put the new barbell in.effects on relationships shake ex girlfriend
but they say to wait at least 3 months for a cartilage piercing, even though it may feel ok, you might irritate something by removing the barbell so my advice is to wait about 2 more month to be on the safe side. :)When is the best time to remove or change the bar of an industrial piercing?you can probably change it now..
i have my industrial and i always changed it after i got it pierced.
ive had it for about 9 months and its perfect.
just make sure you clean it after the first few days when you put the new barbell in.
I don't want people to see my real name on the header when I send email. How can I remove name or change it?
I started the yahoo account to answer dating service emails annonymously but I see where my full real name is on the top of every email I send out. How can I remove it or at least change it to protect my privacy??? Help!!!I don't want people to see my real name on the header when I send email. How can I remove name or change it?http://answers.yahoo.com/question/index;I don't want people to see my real name on the header when I send email. How can I remove name or change it?Go to your email account settings and change your name. It's easy.I don't want people to see my real name on the header when I send email. How can I remove name or change it?Go to my account, and edit user info.
It will make you put in something for a name, so just use two letters or make something up.
It will make you put in something for a name, so just use two letters or make something up.
What if i can change or remove names from?
Can names be remove from a house deeds?
can a name be remove from a house deeds that is fully ownership but have taken a loan from it in the past.how does it work out?if i change over to my name only.
and what if am going to see through that the loan is paid,or else am in trouble,all i need is my house back in my full name.What if i can change or remove names from?First, the person who is on the deed must agree to have themselves removed from the deed. Second, the loan company must agree, too. Third, the loan company requires you to requalify for the loan to make sure that you are able to pay and that the house has equity. The process is very similar to buying any home, except you know which house you want to buy and you know that it costs.
can a name be remove from a house deeds that is fully ownership but have taken a loan from it in the past.how does it work out?if i change over to my name only.
and what if am going to see through that the loan is paid,or else am in trouble,all i need is my house back in my full name.What if i can change or remove names from?First, the person who is on the deed must agree to have themselves removed from the deed. Second, the loan company must agree, too. Third, the loan company requires you to requalify for the loan to make sure that you are able to pay and that the house has equity. The process is very similar to buying any home, except you know which house you want to buy and you know that it costs.
How do you change the starter on a 1992 Nissan 240sx? Be specific! What to remove to get to it ect.?
I need to know what all I need to remove in order to change the starter on my 240sx.HELP!!!!!!!How do you change the starter on a 1992 Nissan 240sx? Be specific! What to remove to get to it ect.?Auto Zone has a Haynes manual for $20. You can look at a Chilton's at you local public library for free.
How do I remove or change the mail I get when I choose to recieve e-mail with key words?
I once chose to get mail from news that contained certain key words. I wnat to change this because I do not want to receive e-mail with that key word anymore how do I change this setting.How do I remove or change the mail I get when I choose to recieve e-mail with key words?Yahoo Mail %26gt; Options %26gt; Filters %26gt; Either Add / Edit / Delete your preferences here. SAVE
How can you bypass, change or remove a Windows XP admin password while in safe mode?
Anyone?How can you bypass, change or remove a Windows XP admin password while in safe mode?the account you use must be an admin. How can you bypass, change or remove a Windows XP admin password while in safe mode?i forget my admin password How to make a fleece T-shirt quilt classmates so passive
Are there any political parties that are gonna remove/change the smoking ban?
Surely this would be an easy way to get 25% of votes (25% of people smoke) and get the votes of all publicans?Are there any political parties that are gonna remove/change the smoking ban?I do hope so - nanny state has got it wrong again.Are there any political parties that are gonna remove/change the smoking ban?nope sorry i dont think any political party is going to risk taking away something that has a got a majority of good response.
unfortunatelyAre there any political parties that are gonna remove/change the smoking ban?No, none are currently proposing it. I think some smokers, including myself, prefer the ban.
I am not convinced that the smoking ban has been detrimental to pubs. Many pubs were closing down years before the ban. Perhaps other factors are at play - like cheap beer in supermarkets, imports, smuggling, or simply a gradual change in attitudes to going out and drinking.
Some publicans actually support the ban. Many have said for years there is more profit in food than there is in beer. Who wants to eat in a smokey pub?
The Health Act 2006 was one of the better pieces of legislation ever made.Are there any political parties that are gonna remove/change the smoking ban?Suggest it to UKIP. They'll promise anything for a few votes.Are there any political parties that are gonna remove/change the smoking ban?Yes, but they would alienate the other 75%.
I don't want to play devil's advocate but for your information it looks as though UKIP comes closest:Are there any political parties that are gonna remove/change the smoking ban?over a 100 thousand people die each year due to smoking, i would like to see a government do more to reduce this, lifting the smoking ban wont help. If i can't use cannabis why should others be able to use an even more deadly drug that kills themselves and other around them?, it should either be a class A drug or other drugs like cannabis and ecstasy should be legalised.Are there any political parties that are gonna remove/change the smoking ban?That ban is never going to be reversed and although I do not smoke I do have some sympathy for smokers who in some instances appear to be demonised . If a smoker visits me at my home I don't mind them lighting up , but most now prefer to sit outside on the patio so as not to interfere with non smokersAre there any political parties that are gonna remove/change the smoking ban?I don't think so.
Political parties are looking to get as many votes as possible, so whilst overturning the smoking ban may get them %25 of the vote, they would potentially lose 75% of the vote. Also the idea of any government is to represent the majority of people ,and do what is best for the country. Most people support the smoking ban, and it is also in the interests of public health (and our taxes through the NHS etc.) to discourage smoking by keeping it outside of public places.Are there any political parties that are gonna remove/change the smoking ban?NO when the Bill to ban smoking went through UK Parliament it was supported by Labour, Conservative, Liberal and Nationalist MPs who (rightly or wrongly) all contend it was in the best interest of public health and that is why it became an Act and then Law first in Scotland and then in England. The only place in the whole of England where the smoking ban does not apply is in the House of Commons itself. UKIP is campaigning to save the British pub but not specifically on the issue of overturning the smoking ban so much as allowing some pubs in every town to be smoking and some non smoking, so there is freedom of choice.
If you really feel strongly about this what you need to do is stand yourself. You just need to get ten sponsors and then put yourself up as a Candidate and in view of the current unpopularity of MPs of all the three main parties you could well end up being an MP. .Are there any political parties that are gonna remove/change the smoking ban?And lose 75% of the votes. Most people despise smokers.Are there any political parties that are gonna remove/change the smoking ban?I don't think there is a party in this country which would reverse or modify the ban on smoking.
As a smoker myself, I honestly have no problem with the ban and believe it or not, I do understand non-smokers complaints about this issue.
However what I do object to was the way the ban was introduced regardless of any rights to the smoker be it he has now been classified as a virus,and the ex smokers who in my opinion are the greatest moaners than the people that have never smoked.
I am not trying to seek justification for my habit, but lets have a little consideration for all concerned.
The next ban without doubt will be on the obese, who no doubt will be banned from all food stores until they comply with the weight restrictions as laid down by government..Are there any political parties that are gonna remove/change the smoking ban?You may want to ask New Labour why they renaged on their 2005 manifesto regarding the smoking ban - page 33 of the manifesto, it makes interesting reading and is a far cry from what was actually imposed after re-election.
There are 300,000 deaths from heart attacks in the UK per year - 100,000 from work related stress. Don't hear too many cries for an improvement in working conditions though - but money talks in the UK.
unfortunatelyAre there any political parties that are gonna remove/change the smoking ban?No, none are currently proposing it. I think some smokers, including myself, prefer the ban.
I am not convinced that the smoking ban has been detrimental to pubs. Many pubs were closing down years before the ban. Perhaps other factors are at play - like cheap beer in supermarkets, imports, smuggling, or simply a gradual change in attitudes to going out and drinking.
Some publicans actually support the ban. Many have said for years there is more profit in food than there is in beer. Who wants to eat in a smokey pub?
The Health Act 2006 was one of the better pieces of legislation ever made.Are there any political parties that are gonna remove/change the smoking ban?Suggest it to UKIP. They'll promise anything for a few votes.Are there any political parties that are gonna remove/change the smoking ban?Yes, but they would alienate the other 75%.
I don't want to play devil's advocate but for your information it looks as though UKIP comes closest:Are there any political parties that are gonna remove/change the smoking ban?over a 100 thousand people die each year due to smoking, i would like to see a government do more to reduce this, lifting the smoking ban wont help. If i can't use cannabis why should others be able to use an even more deadly drug that kills themselves and other around them?, it should either be a class A drug or other drugs like cannabis and ecstasy should be legalised.Are there any political parties that are gonna remove/change the smoking ban?That ban is never going to be reversed and although I do not smoke I do have some sympathy for smokers who in some instances appear to be demonised . If a smoker visits me at my home I don't mind them lighting up , but most now prefer to sit outside on the patio so as not to interfere with non smokersAre there any political parties that are gonna remove/change the smoking ban?I don't think so.
Political parties are looking to get as many votes as possible, so whilst overturning the smoking ban may get them %25 of the vote, they would potentially lose 75% of the vote. Also the idea of any government is to represent the majority of people ,and do what is best for the country. Most people support the smoking ban, and it is also in the interests of public health (and our taxes through the NHS etc.) to discourage smoking by keeping it outside of public places.Are there any political parties that are gonna remove/change the smoking ban?NO when the Bill to ban smoking went through UK Parliament it was supported by Labour, Conservative, Liberal and Nationalist MPs who (rightly or wrongly) all contend it was in the best interest of public health and that is why it became an Act and then Law first in Scotland and then in England. The only place in the whole of England where the smoking ban does not apply is in the House of Commons itself. UKIP is campaigning to save the British pub but not specifically on the issue of overturning the smoking ban so much as allowing some pubs in every town to be smoking and some non smoking, so there is freedom of choice.
If you really feel strongly about this what you need to do is stand yourself. You just need to get ten sponsors and then put yourself up as a Candidate and in view of the current unpopularity of MPs of all the three main parties you could well end up being an MP. .Are there any political parties that are gonna remove/change the smoking ban?And lose 75% of the votes. Most people despise smokers.Are there any political parties that are gonna remove/change the smoking ban?I don't think there is a party in this country which would reverse or modify the ban on smoking.
As a smoker myself, I honestly have no problem with the ban and believe it or not, I do understand non-smokers complaints about this issue.
However what I do object to was the way the ban was introduced regardless of any rights to the smoker be it he has now been classified as a virus,and the ex smokers who in my opinion are the greatest moaners than the people that have never smoked.
I am not trying to seek justification for my habit, but lets have a little consideration for all concerned.
The next ban without doubt will be on the obese, who no doubt will be banned from all food stores until they comply with the weight restrictions as laid down by government..Are there any political parties that are gonna remove/change the smoking ban?You may want to ask New Labour why they renaged on their 2005 manifesto regarding the smoking ban - page 33 of the manifesto, it makes interesting reading and is a far cry from what was actually imposed after re-election.
There are 300,000 deaths from heart attacks in the UK per year - 100,000 from work related stress. Don't hear too many cries for an improvement in working conditions though - but money talks in the UK.
Change add or remove programs to open up a different program?
I want to have the control panel icon for Add / Remove Programs open up Revo Uninstaller.
And maybe even with the run command appwiz.cpl open up Revo Uninstaller.
Is there some place in the registry where this can be edited?
Thanks much!Change add or remove programs to open up a different program?Well, You cant easily change the Add/remove thing.
BUT, you can easily create a run command that opens Revo uninstaller.
My run command is revo, and it opens it.
Its very easy to create a run command:
Open the run box, and type in system32
What run command does, is simply open shortcuts and files in the system32 folder, so all you have to do is put in a shortcut for revo uninstaller in the system32 folder and rename i to whatever you want.
Then open up run command and type in the name of the shortcut and it'll run revo.
NOTE: As admin right are required to rename a file in system32, you should rename it to what you want be before you copy and paste it in.
Good luck, hope this helped. If you need anymore help feel free to email me.Change add or remove programs to open up a different program?best remove program-Registry Easy
one step to uninstall a program.
it is easy to use.
http://www.make-pc-faster.com/
And maybe even with the run command appwiz.cpl open up Revo Uninstaller.
Is there some place in the registry where this can be edited?
Thanks much!Change add or remove programs to open up a different program?Well, You cant easily change the Add/remove thing.
BUT, you can easily create a run command that opens Revo uninstaller.
My run command is revo, and it opens it.
Its very easy to create a run command:
Open the run box, and type in system32
What run command does, is simply open shortcuts and files in the system32 folder, so all you have to do is put in a shortcut for revo uninstaller in the system32 folder and rename i to whatever you want.
Then open up run command and type in the name of the shortcut and it'll run revo.
NOTE: As admin right are required to rename a file in system32, you should rename it to what you want be before you copy and paste it in.
Good luck, hope this helped. If you need anymore help feel free to email me.Change add or remove programs to open up a different program?best remove program-Registry Easy
one step to uninstall a program.
it is easy to use.
http://www.make-pc-faster.com/
How do I remove google or change the search box in Safari?
It's funny that Apple portrays itself as non-conformist but it seems that I am stuck to conforming with the other supposedly non-conformist entity-Google. I do not like google and I want it removed from Safari. In fact, I would like to be able to change the default engine in that box like I can with Firefox. Does anyone know of an easy way to do this?
Thanks-
DaveHow do I remove google or change the search box in Safari?Hello David,
I agree with you, there is always place for more!
Do use this Safari plugin:
http://www.inquisitorx.com/safari/
It does everything you've asked for!
GHow do I remove google or change the search box in Safari?Thanks so much! This is EXACTLY what I was looking for!
Dave
Don't forget, the CEO of Google serves on Apple's board of directors. Hence the collaboration with Apple.
There are also other browsers available to the Mac. Just search for them on VersionTracker or Apple's Mac OS X Downloads page.
Thanks-
DaveHow do I remove google or change the search box in Safari?Hello David,
I agree with you, there is always place for more!
Do use this Safari plugin:
http://www.inquisitorx.com/safari/
It does everything you've asked for!
GHow do I remove google or change the search box in Safari?Thanks so much! This is EXACTLY what I was looking for!
Dave
Report Abuse
How do I remove google or change the search box in Safari?Well, it's not a plug-in, it's built in to the browser. Personally, I think Google is the best search engine available. If you with to have another search engine built in to your browser, you may have to use Firefox. There could be plug-ins for Safari, but I'm not certain.Don't forget, the CEO of Google serves on Apple's board of directors. Hence the collaboration with Apple.
There are also other browsers available to the Mac. Just search for them on VersionTracker or Apple's Mac OS X Downloads page.
How do I change/remove my network in Facebook?
You have to do this:
*Go to settings
*Go to account settings
*Click on the network tab
*You'll see the networks you're in and you have to click on %26quot;Leave this network%26quot; on the one you want to leave
*If you want to change the network, There's an option in the right part where you can look for a network and join a new one. Please, bear in mind that sometimes to join a High school or College network you have to have a valid e-mail on that college or high school
*Go to settings
*Go to account settings
*Click on the network tab
*You'll see the networks you're in and you have to click on %26quot;Leave this network%26quot; on the one you want to leave
*If you want to change the network, There's an option in the right part where you can look for a network and join a new one. Please, bear in mind that sometimes to join a High school or College network you have to have a valid e-mail on that college or high school
Conservatives (What are they going to change/remove)?
I know little of this party and now they are apart of the hung Parliament. What are they going to change. Apparently it's going to be like when Margaret Thatcher was the prime minister.
From what I know they are getting rid of EMA, child tax and other stuff what people actually need.Conservatives (What are they going to change/remove)?Everyone will go back to wearing powdered wigsConservatives (What are they going to change/remove)?They can start with getting rid of all the immigrantsConservatives (What are they going to change/remove)?nothing because theyre not in power yet.Conservatives (What are they going to change/remove)?They want to get rid of EMA bonuses, not the EMA. They don't think it's right that some people get bonuses for going to school, when others dont.
They're only cutting child tax benefits for the middle classes. People can get them even if they're earning 70,000 a year or more, which is ridiculous.Conservatives (What are they going to change/remove)?Hopefully they will start to work dismantling Labour's apparatus for measurement and control for its comrade citizens. It cost billions to measure every aspect of our lives and the civil service and councils are bloated with armies of inspectors and enforcement people determined to ensure that the hundreds of new laws which labour devise each year are complied with.facial hair make word remember
From what I know they are getting rid of EMA, child tax and other stuff what people actually need.Conservatives (What are they going to change/remove)?Everyone will go back to wearing powdered wigsConservatives (What are they going to change/remove)?They can start with getting rid of all the immigrantsConservatives (What are they going to change/remove)?nothing because theyre not in power yet.Conservatives (What are they going to change/remove)?They want to get rid of EMA bonuses, not the EMA. They don't think it's right that some people get bonuses for going to school, when others dont.
They're only cutting child tax benefits for the middle classes. People can get them even if they're earning 70,000 a year or more, which is ridiculous.Conservatives (What are they going to change/remove)?Hopefully they will start to work dismantling Labour's apparatus for measurement and control for its comrade citizens. It cost billions to measure every aspect of our lives and the civil service and councils are bloated with armies of inspectors and enforcement people determined to ensure that the hundreds of new laws which labour devise each year are complied with.
How do I delete someting from my "add/change or remove programs" when next to it, it doesn't have the "remove"
I want to delete Microsoft Visual J# .NET Redistributable Package 1.1, but like I said no %26quot;remove%26quot; option.How do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;A few tricky programmers do that to stay on your add list but there is an easy way of getting rid of them.
Click Start-Search-All files And Folders.
Type the name of the program in the box and hit search.
As the name appears in the search results, right click them and click Delete.
If they are in a file, including folder, click Open, Including Folder and the item will be highlighted there.
Right click it and Delete.
Reboot, re search to make sure it isn't still there, (sometimes they regenerate if you don't do this).
After you are sure you have all of it, reboot one more time for good measure.How do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;This might help you out...
http://support.microsoft.com/kb/310750How do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;double click itHow do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;Push the add/change button, and that should remove the program.How do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;try..start%26gt; all programs%26gt; click on the program your after, you might see on option to uninstall it.How do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;ya that happens sometime
goto start%26gt;%26gt; programs%26gt;%26gt; here look for the software that you want to delete...under than program, you might see on of the submenu giving you an option to uninstall..
if not able to find.. goto microsoft website.
Click Start-Search-All files And Folders.
Type the name of the program in the box and hit search.
As the name appears in the search results, right click them and click Delete.
If they are in a file, including folder, click Open, Including Folder and the item will be highlighted there.
Right click it and Delete.
Reboot, re search to make sure it isn't still there, (sometimes they regenerate if you don't do this).
After you are sure you have all of it, reboot one more time for good measure.How do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;This might help you out...
http://support.microsoft.com/kb/310750How do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;double click itHow do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;Push the add/change button, and that should remove the program.How do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;try..start%26gt; all programs%26gt; click on the program your after, you might see on option to uninstall it.How do I delete someting from my %26quot;add/change or remove programs%26quot; when next to it, it doesn't have the %26quot;remove%26quot;ya that happens sometime
goto start%26gt;%26gt; programs%26gt;%26gt; here look for the software that you want to delete...under than program, you might see on of the submenu giving you an option to uninstall..
if not able to find.. goto microsoft website.
How do I remove & change the pin in a craftsman eager-1 pushmower?
you need a hammer and punch about the same diameter as the pin. Put the punch next to the pin and by hitting the punch with the hammer the pin will come out.put the new pin at the hole that the old one came out of and carefully tap the new pin into the hole with the hammer until its flushHow do I remove %26amp; change the pin in a craftsman eager-1 pushmower?Which pin?
What policies should schools change or remove?
Im doing this project in civics class where we have to make a political party and at the end of the week we will be doing a mock election. For the written part i have to write 5 things that i would change about the school rules or new rules i would make up. if you have any ideas please share!
Thanks for the help:)What policies should schools change or remove?I think schools should allow students to have more of a voice in governing the school. For example: after administration whittles down a candidate pool to 3 candidates, let students interact with them, etc...
Thanks for the help:)What policies should schools change or remove?I think schools should allow students to have more of a voice in governing the school. For example: after administration whittles down a candidate pool to 3 candidates, let students interact with them, etc...
Does anyone know how I can change or remove names on a deed?
My mother and I purchased a two-family home 10 years ago. She recently separated from her husband and wants to remove his name from the deed of the house. How do I go about this? I live in NYC.Does anyone know how I can change or remove names on a deed?I don't think she can do that without getting a quit claim deed form signed by her husband agreeing to having his name removed from the deed ( it should be notarized). This will not relieve him of the debt obligation if there is a mortgage on the property.
You probably should check with the recorders office in your state to make sure your state rules are not different.Does anyone know how I can change or remove names on a deed?Your mother and you purchased the property but HE'S on the title? She can't %26quot;remove him.%26quot; He would have to do it. She needs to see an attorney.Does anyone know how I can change or remove names on a deed?I live in NY and have done this. You can use a lawyer but you don't have to if you know what you are doing. He has to file a quit claim deed. He will need to sign his share over. His signature will need to be notarised.
But I am assuming that this action is being done in conjunction with a separation of assets? NY is a community property state so this will not change his entitlement to a share of the asset as NY State regards all assets acquired during a marriage as jointly owned. Assets acquired prior to a marriage become jointly owned if marital income is used (for instance to pay a mortgage or pay for repairs).
The name on the title deed does not change this, your mother's share of your house is jointly owned with her husband whatever the deed says.Does anyone know how I can change or remove names on a deed?You can't just arbitrarily remove someone's name from a deed because he is part owner of the house. She would have to get him to sign a quit claim deed, if he will do that. An attorney handles it.Does anyone know how I can change or remove names on a deed?You cannot. Neither can your mother. He is a part-owner, and only he can remove his name from the deed by signing a Quit Claim Deed to the other owner(s). This is going to have to be done as part of the property settlement in the separation/divorce. Your mother needs an attorney urgently to file for divorce, negotiate the property settlement, including his signing the Quit Claim Deed, and get these matters settled.
How did he get his name on that deed to begin with if you and your mother bought the property and paid for it? If he was not on the mortgage and did not help pay for the property, he never should have been on there in the first place. Somebody fouled up and it could be a very expensive fix. The attorney is absolutely necessary now or this is going to cost you %26amp; your mom a great deal more than atty fees.
You probably should check with the recorders office in your state to make sure your state rules are not different.Does anyone know how I can change or remove names on a deed?Your mother and you purchased the property but HE'S on the title? She can't %26quot;remove him.%26quot; He would have to do it. She needs to see an attorney.Does anyone know how I can change or remove names on a deed?I live in NY and have done this. You can use a lawyer but you don't have to if you know what you are doing. He has to file a quit claim deed. He will need to sign his share over. His signature will need to be notarised.
But I am assuming that this action is being done in conjunction with a separation of assets? NY is a community property state so this will not change his entitlement to a share of the asset as NY State regards all assets acquired during a marriage as jointly owned. Assets acquired prior to a marriage become jointly owned if marital income is used (for instance to pay a mortgage or pay for repairs).
The name on the title deed does not change this, your mother's share of your house is jointly owned with her husband whatever the deed says.Does anyone know how I can change or remove names on a deed?You can't just arbitrarily remove someone's name from a deed because he is part owner of the house. She would have to get him to sign a quit claim deed, if he will do that. An attorney handles it.Does anyone know how I can change or remove names on a deed?You cannot. Neither can your mother. He is a part-owner, and only he can remove his name from the deed by signing a Quit Claim Deed to the other owner(s). This is going to have to be done as part of the property settlement in the separation/divorce. Your mother needs an attorney urgently to file for divorce, negotiate the property settlement, including his signing the Quit Claim Deed, and get these matters settled.
How did he get his name on that deed to begin with if you and your mother bought the property and paid for it? If he was not on the mortgage and did not help pay for the property, he never should have been on there in the first place. Somebody fouled up and it could be a very expensive fix. The attorney is absolutely necessary now or this is going to cost you %26amp; your mom a great deal more than atty fees.
Subscribe to:
Posts
(Atom)